Welcome: Photel Communication Technology Co., Ltd
Language: Chinese ∷  English

PT-50 PCM Serial Equipment

  • PT-50T 2510 PCM Equipment
PT-50T 2510 PCM Equipment

PT-50T 2510 PCM Equipment

  • PCM Equipment
  • Product description: ​PT-50T 2510 adopts 2.5U height standard 19" rack mountable chassis for exchange office. The powerful switching matrix provides 256 x256 non-blocking cross connections. System supports maximum 96 x E1
  • INQUIRY

Brief Introduction

PT-50T 2510 adopts 2.5U height standard 19" rack mountable chassis for exchange office. The powerful switching matrix provides 256 x256 non-blocking cross connections. System supports maximum 96 x E1, and 96 x 64Kbps channels with the expansion chassis. Various network cards, such as PDH, E1 and TDMoIP (Ethernet) uplink card are available for fitting different networks requirement.

System designs with reliability enhancement, such as redundancy controller, 1+1 uplink and dual power supply. It can configure for point to point or point to multipoint networking with different type of transport media; and it can execute D/I (drop/insert) function by cross connection matrix as well.

PT-50T 2510 is managed by the powerful NMS system for real time monitoring, local / remote diagnostic and alarm control. System software can be downloaded remotely through the management control center without engineer on site.

Features

Ø Enhanced redundant and hot swappable design for controller, network interface and power supply;

Ø Versatile concentration platform, support E1, PDH and TDMoIP networking;

Ø Reliable system design with redundant controller, 1+1 optical link protection and dual power supply;

Ø Powerful 256 x 256 non-blocking matrixes for 96 x E1 cross connection;

Ø Synchronous data module includes 64Kbps co-directional, N×64Kbps data interface;

Ø Asynchronous data module with RS232 and RS485 interface;

Ø Voice module includes FXO, FXS, Hotline, Magneto, Carrier-wave and 2/4-wire E&M interface;

Ø Data modules include RS232RS485V35G703;

Ø Total 10 slots: 2 fixed slot for Master control card, 2 fixed slot for Power supply, 6 slots for service business;

Ø NMS port: RS232 or Ethernet interface;

Ø Upgrade firmware and software remotely;

Ø Power supply with AC220V or DC-48V, or AC220V + DC-48V.

Specification

E1 Interface

PDH Optical Interface

Bit rate: 2.048Mbps ±50ppm;

Code type: HDB3 code, G.703 standard;

Input impedance: 75W or 120W;

Frame structure: G.704, G.706 ;

Jitter: G.742, G.823.

Bit rate: 150Mbps ±50ppm;

Output optical power: ≥-15dBm;

Receiving sensitivity: ≤-35dBm;

Optical wavelength: 1310nm/1550nm;

Optical interface connecter: SFP/LC.

Power Supply

Ethernet Interface

Input voltage: -48Vdc or 220Vac;

Voltage range: -36Vdc ~ -72Vdc, 176Vac ~ 264Vac;

Power consumption: <150W .

Bit rate: 10/100Mbps, half/full duplex auto;

Standard: IEEE 802.3, IEEE 802.1Q (VLAN);

Connector: RJ45.

Operation Environment

Mechanical Structure

Working temperature: -10°C ~ 50°C;

Working humidity: 5% ~ 95 % (non-condensed);

Storage temperature: -40°C ~ +80°C.

Dimension: 440mm x 270mm x 110mm;

Net weight: 10Kg.

Application