Welcome: Photel Communication Technology Co., Ltd
Language: Chinese ∷  English

PT-50P Intelligent Auto Protection Switch

  • PT-50P 5056 Intelligent Auto Protection Switch
PT-50P 5056 Intelligent Auto Protection Switch

PT-50P 5056 Intelligent Auto Protection Switch

  • Product description: PT-50P 5056 is a high capacity i-APS (Intelligent Auto Protection Switch) provides the most valuable data services with extreme high availability for the bank, military or government department. It ac
  • INQUIRY

Brief Introduction

PT-50P 5056 is a high capacity i-APS (Intelligent Auto Protection Switch) provides the most valuable data services with extreme high availability for the bank, military or government department. It acquires a 5U height, standard 19" shelf with 17 service card slots, supports up to 56 E1 channels.

Intelligent software with all links active technique; auto by-passing when power cut and the design of hot swappable service card and power card, all that enable the seamless and *non-destructive switch over is possible and enhanced the maximum availability for the high standard and important data services.

PT-50P 5056 can work in point to point, and also work with PT-50P 1508 as remote node to form a point to multipoint network. The powerful NMS manage and control the whole network with simple click, that simplify the task of configuration and network diagnostic.

Features

Ø High capacity intelligent protection switch for maximum of 56 E1 channels;

Ø Standard 5U height, 19" shelf with 17 service slots;

Ø Supports 1+1 AC and/or DC power supply, all types of card are hot swappable;

Ø Automatic by-pass when power is off for guaranty data services continuity and availability;

Ø Both master and slave links are active all the time;

Ø *Non-destructive and seamlessly switching for highly system availability;

Ø Receive paths are monitored and the best quality data will be sent to the user device;

Ø Any type of alarm, such as LOS, AIS or E3, E6 error rate appears on the receive path, switch over is triggered;

Ø Single end switch due to the receive data quality is turn bad in one side;

Ø Best receiving path is memorized and resumed automatically after maintenance;

Ø Powerful management system to simplify the device control and maintenance.

Specification

E1 Interface

Management Port

Bit rate: 2.048Mbps ±50ppm

Code type: HDB3 code, G.703 standard

Input impedance: 75Ω or 120Ω

Frame structure: G.704, G.706

Jitter: G.742, G.823

ETH Interface: 10/100Mbps auto

Connector: RJ45

Power Supply

Operation Environment

Input voltage: -48Vdc or 220Vac;

Voltage range: -36Vdc ~ -72Vdc, 176Vac ~ 264Vac;

Power consumption: <50W .

Working temperature: -10°C ~ 50°C;

Working humidity: 5% ~ 95 % (non-condensed);

Storage temperature: -40°C ~ +80°C.

Mechanical Structure

Dimension: 440mm x 280mm x 220mm;

Net weight: 15Kg.

Application