Welcome: Photel Communication Technology Co., Ltd
Language: Chinese ∷  English

PT-50P Intelligent Auto Protection Switch

  • PT-50P 1508 Intelligent Auto Protection Switch
  • PT-50P 1508 Intelligent Auto Protection Switch
PT-50P 1508 Intelligent Auto Protection SwitchPT-50P 1508 Intelligent Auto Protection Switch

PT-50P 1508 Intelligent Auto Protection Switch

  • Product description: PT-50P 1508 is an intelligent E1 channel auto protection switch (i-APS) that acquires a standard 19" / 1.5U height chassis, and supports 1+1 dual power, for maximum of 8 E1 channels protection.
  • INQUIRY

Brief Introduction

PT-50P 1508 is an intelligent E1 channel auto protection switch (i-APS) that acquires a standard 19" / 1.5U height chassis, and supports 1+1 dual power, for maximum of 8 E1 channels protection.

Unlike the traditional A/B switch, the PT-50P 1508 enable both the master and slave transmission links simultaneously, monitor the quality of data received from both paths, and intelligently make-up the decision to accept the data received which is totally error free. Even the device is powered off, the data will be by-passed automatically. For such both active transmission links technique, it guaranties the maximum availability of data transmission and non-destructive switch over.

When switch over is triggered by error rate or just only the receive path is disconnected, single end switch is appeared, the other end will maintain as usual, that can maximize the system availability. All types of card and power module are hot swappable, and the system will memorize the best receiving data path and resumed as before after the maintenance.

The PT-50P 1508 is widely used for the most valuable data protection and provides the best data services for banking, aviation department and public electric facility.

Features

Ø Extremely high hardware and circuitry reliability, chassis supports 1+1 power supply, and all types of circuit board are hot swappable;

Ø High integration for only 1.5U height chassis, supports up to 8 E1 channels protective switching;

Ø Automatic by-pass when power is off for guaranty data services continuity and availability;

Ø Both master and slave links are active all the time;

Ø * Non-destructive and seamlessly switching for highly system availability;

Ø Receive paths are monitored and the best quality data will be sent to the user device;

Ø Any type of alarm, such as LOS, AIS or E3, E6 error rate appears on the receive path, switch over is triggered;

Ø Single end switch due to the receive data quality is turn bad in one side;

Ø Best receiving path is memorized and resumed automatically after maintenance.

Specification

E1 Interface

Management Port

Bit rate: 2.048Mbps ±50ppm

Code type: HDB3 code, G.703 standard

Input impedance: 75Ω or 120Ω

Frame structure: G.704, G.706

Jitter: G.742, G.823

ETH Interface: 10/100Mbps auto

Connector: RJ45

Power Supply

Operation Environment

Input voltage: -48Vdc or 220Vac;

Voltage range: -36Vdc ~ -72Vdc, 176Vac ~ 264Vac;

Power consumption: <50W .

Working temperature: -10°C ~ 50°C;

Working humidity: 5% ~ 95 % (non-condensed);

Storage temperature: -40°C ~ +80°C.

Mechanical Structure

Dimension: 440mm x 233mm x 66mm;

Net weight: 5Kg.

Application