Welcome: Photel Communication Technology Co., Ltd
Language: Chinese ∷  English

PT-10 TDM OVER IP Serial Equipment

  • PT-10 Desktop TDM OVER IP Equipment
PT-10 Desktop TDM OVER IP Equipment

PT-10 Desktop TDM OVER IP Equipment

  • Product description: PT-10 Desktop TDMover IP will transmit E1 signal through IP channel, the IP channel canbe existing wired Ethernet channel or wireless Ethernet channel. It supports 4E1 or 8E1, four electric ETH inter
  • INQUIRY
Brief Introduction

    PT-10 Desktop TDM over IP will transmit E1 signal through IP channel, the IP channel can be existing wired Ethernet channel or wireless Ethernet channel.
    It supports 4E1 or 8E1, four electric ETH interfaces and one FC ETH interface; AC or DC power supply. It supports WEB SNMP GUI NMS. The transmitted E1 can be framed or un-framed format, the E1 interface of the same TDM over IP equipment can be connected with the different remote TDM over IP equipment.

Features

* Providing up to 8E1 interfaces;

* Providing four electric ETH interfaces and one FC ETH interface, herein 1ETH interfaces are uplink interfaces, and the other 4ETH interfaces are downlink service interfaces;

* Providing Optical ETH uplink interface;

* Having the high transmission efficiency, and the transmission delay can be adjusted;

* Supporting point to point, point to multi-point transmission;

* Supporting E1 framed, unframed setting;

* Supporting E1 loss alarm indication;

* Adopting UDP encapsulation, and supporting different types of Ethernet transmission channels;

* Supporting Ethernet PING package function;

* Ethernet supports 10/100M self-adaptive,half/full duplex self-adaptive;

* Supporting E1 package QoS assurance;

* The equipment firmware and software supports remote update function;

* Dual power protection, support AC220V or DC-48V(optional).

Technical Specification

* Ethernet complies with IEEE 802.3 related recommendations, supports 10/100M self-adaptive, half/full duplex self-adaptive;

* E1 interface complies with ITU-T G.703 suggestions, the impedance is 120Ω, it adopts RJ45 connector;

* NMS port is ETH port or RS232 port, when adopting ETH NMS mode, it can manage any equipment inside the network;

* Power consumption: less than 5W

* Working temperature: -10°C to 50°C, humidity ≤90%(non-condensation)

* Dimensions: 224mm(w)×148.2mm(h)×43.4mm(d)

Application

1. point to point application

2. point to multipoint application

CONTACT US

Tel: +86-25-84701010

Email: sales@photel.com.cn

Add: 3nd Floor 8th Building,R&D Area 1, No.699-8 Xuanwu Road, Nanjing.China ,210023