Welcome: Photel Communication Technology Co., Ltd
Language: Chinese ∷  English

PT-80 PDH Serial Equipment

  • PT-80 1016 16E1 4FE PDH Equipment
PT-80 1016 16E1 4FE PDH Equipment

PT-80 1016 16E1 4FE PDH Equipment

  • Product description: PT-80 1016 PDH adopts 1U high standard 19" rack. It is composed of 1+1 optical interfaces, 16 E1 interfaces, 4 electrical ETH interfaces or 3 electrical ETH interfaces and 1 SFP 100M optical ETH inter
  • INQUIRY
Brief Introduction

    PT-80 1016 PDH is point-to-point transmission equipment operating at 150Mb/s bit rate. It adopts 1U high standard 19" rack. It is composed of 1+1 optical interfaces, 16 E1 interfaces, 4 electrical ETH interfaces or 3 electrical ETH interfaces and 1 SFP 100M optical ETH interface, 1 EOW interface, 1 ETH NMS interface, 1 RES232 NMS interface, 1 RS232 interface, 1 Alarm interface, 1 220VAC power supply and 1 -48VDC power supply.
    PT-80 1016 PDH Equipment supports RS232 and ETH management; it can manage the PDH equipment through the whole WAN network. It realizes remote update function, Alarms, performance monitor, and parameters setting are available through the ETH NMS interface.
    The equipment is featured by very compact, minimum cost and low power consumption. It is ideal for application areas such as remote transmission in point

Features

* Networking ability, can build up PDH network through the WAN network;

* Support RS232 and ETH NMS management, and user can manage all the PDH equipment through WAN network;

* Support Remote update function;

* Alarms, performance monitor, and information about the local/remote equipment status are available;

* Optical interface: 150Mb/s, 60Km transmission without repeater, support 1+1 production;

* Providing 16E1 interfaces, local/remote loopback is supported;

* 4ETH interfaces, and user can select 4 electrical ETH interfaces or 3 electrical ETH interfaces and 1 100Base-FX SFP optical ETH interface by DIP switch, supports special VLAN, VLAN, broadcast protection, and enable or disable the ETH interface;

* Providing Engineering Order Wire (EOW), ETH NMS interface and RS232 interface (NMS) for equipment management;

* Provide 1 RS232 interface for user application;

* Both AC 220 and DC-48 are available;

* Single board design, 1U high, and 19 Inch wide.

Technical Specification

* Optical interface
    Speed: 150Mb/s ±50ppm
    Output optical power: ≥-15dBm
    Receiving sensitivity: ≤-35dBm
    Optical wave length: 1310nm/1550nm
    Optical interface connector: SC/FC

* 2M interface
    Bit rate: 2048Kbps ±50ppm
    Code type: HDB3 code, conforming to G.703 standard
    Input impedance: 75Ω(unbalanced interface), 120Ω(balanced interface) optional
    Frame structure: Conforming to G.704, G.706
    Compression law: Conforming to G.711
    Level: ±2.37V ±10%

* ETH interface (10/100M UTP)
    Speed: 10/100Mbps, half/full duplex auto-negotiation
    Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
    Connector: RJ45

* ETH interface (100BASE/FX)
    Speed: 10/100Mbps, half/full duplex
    Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
    Connector: RJ45

* Order Wire interface
    Telephone set: standard 2 line telephone
    Bandwidth : 64Kb/s
    Coding: SFP/LC

* Dimension and weight
    Dimensions: 440mm(w)×270mm(d)×44mm(h)
    Net weight: 4Kg

* Power Supply
    Input voltage: Standard value DC-48V and AC220V
    Voltage range:DC -36V to DC-72V, AC176V ~ AC264V
    Power consumption: <10W

* Operation Environment
    Working temperature: -10°C ~ 50°C
    Working Humidity: 5%~95% (no condensation)

Application

CONTACT US

Tel: +86-25-84701010

Email: sales@photel.com.cn

Add: 3nd Floor 8th Building,R&D Area 1, No.699-8 Xuanwu Road, Nanjing.China ,210023