Welcome: Photel Communication Technology Co., Ltd
Language: Chinese ∷  English

PT-50X EOP Converter series

  • PT-50X 1016 Ethernet Over E1
PT-50X 1016 Ethernet Over E1

PT-50X 1016 Ethernet Over E1

  • Product description: PT-50X 1016 supports the transparent transmission of Ethernet data on 1~16 E1 channels. The maximum bit rate is 31.68Mb/s. EOP-X adopts international standard protocol (G.7041、G.7042、G.7043、G.8040) a
  • INQUIRY
Brief Introduction

    PT-50X Ethernet Over E1 Interface Converter supports the transparent transmission of Ethernet data on 1~16 E1 channels. The maximum bit rate is 31.68Mb/s. EOP-X adopts international standard protocol (G.7041、G.7042、G.7043、G.8040) at the process for all layers and able to inter communicate with third party device followed same standard. The device does not only provide perfect alarm/status indication for E1 and Ethernet, but with advanced management function such as Ethernet data traffic statistics etc. The device is with high integration, low power consumption, stable performance and easy to use.
    PT-50X Ethernet Over E1 Interface Converter adopts international standard protocol at all levels, which can also communicate with the similar product of other manufacturers.

Features

* Transmission over E1 interfaces;

* Auto adaptation of Ethernet data over 1~16E1;

* Auto-restore of E1 link after eliminating the failure;

* For 16E1 channels, the maximum tolerable time delay between links can be up to220ms. It will have an alarm for exceed the limit when the time delays over 220ms. E1 link comply with jitter tolerance and jitter transfer characteristics of ITU-T G.823;

* 10/100BT Ethernet interface, provide4 maximum shared Ethernet interfaces;

* Support VLAN based on interface, fully comply with IEEE 802.1Q standard;

* Support frame length: minimum: 64 bytes, maximum: 1916 bytes;

* Provide statistics for each Ethernet interface, such as the fault package number andtotal package number etc;

* Support hyper terminal or SNMP/WEB management;

* GFP-Fen capsulation complies to G.7041;

* VCAT and LCAS complies to G.7042;

* Ethernet to nxE1 mapping complies to G.7043;

* Ethernet to E1 mapping complies to G.8040;

* The Ethernet data will not be damaged if enlarge or reduce the transmission bandwidth by means of network management;

* Asymmetric transmission supported, when a one direction of the E1 is failed, the other direction can still work;

* E1 channel will be cut off when in loop back and restore when loop back is removed;

* Provides alarm indication, display local or remote optional;

* Support local E1 circuit loop back function, facilitate to test E1 circuits;

Technical Specification

* 2M interface
    Bit rate:2048Kbps ±50ppm
    Code type: HDB3 code, conforming to G.703 standard
    Input impedance: 75Ω (unbalanced interface) or 120Ω (balanced interface) optional
    Frame structure: Conforming to G.704, G.706
    Compression law: Conforming to G.711
    Level:±2.37V ±10%

* ETH interface (10/100M UTP)
    Speed: 10/100Mbps, half/full duplex auto-negotiation
    Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
    Connector:RJ45

* Dimension and weight
    Dimensions: 224mm(w)×148.2mm(h)×43.4mm(d)
    Net weight: 3Kg

* Power Supply
    Input voltage: Standard value DC-48V or AC220V
    Voltage range: DC-36V to DC-72V, AC176V~AC264V
    Power consumption: <5W

* Operation Environment
    Working temperature: -10°C ~ 50°C
    Working Humidity: 5% ~ 95% (no condensation)

Application

CONTACT US

Tel: +86-25-84701010

Email: sales@photel.com.cn

Add: 3nd Floor 8th Building,R&D Area 1, No.699-8 Xuanwu Road, Nanjing.China ,210023